ProtoFil 1kg Flexible PLA 3D Printer Filament 1.75mm for 3D printing

 Soft and high toughness with good layer adhesion

Nozzle temperature: 190-240C

Bed Temperature: 25-60C

Drying: 70C for 5h

Printing speed: 20-200mm/s

Retract length: 0.3-1mm

Heat deflection temperature: 90C

Bending strength: 7-9MPa

Tensile strength: 27-28MPa

Bending modulus: 6-7MPa

Elongation at break: 400-600%

Density: 1.26g/cm3

Melt flow index: 6-10g/10min

Water absorption rate: <0.5%

As makers, we know how important high quality filament is to you, so we set out to bring you the best.

ProtoFil gives you consistent print quality with good inter-layer adhesion. Each spool of ProtoFil is neatly wound and comes in a vacuum sealed bag. Print with ease using ProtoFil.

For makers, by makers.