Elegoo Rapid PLA+
Compared with PLA, it is suitable for both high-speed and low-speed printing, and less prone to stringing during high-speed printing, with better overhang and bridge printing results. When the same force is applied, the deformation is less than that of PLA.
Nozzle Temp: 200-230C (recommended 220C)
Bed Temp: 40-60C
Printing speed: 30-600mm/s
Density: 1.2g/cm3
Melt Index: 8.2g/10min (190C/2.16kg)
Tensile Strength: >= 60MPa
Elongation at Break: 19%
Bending Strength: 80MPa
Bending Modulus: 2680MPa
Charpy Impact Strength: 3.85kJ/m2
Fan: 100%
Line length: 330-335m
Rockwell hardness: 88
Thermal Deformation Temp: 58C (0.45MPa)
