ANYCUBIC 405nm Resin for Photon 3D Printer LCD UV Sensitive Resin 1kg Liquid Printing Material
👍 Compatible with Anycubic, Creality, Elegoo, Phrozen, Peopoly and other resin printer brands
◾Resin parameters for ABS-like Pro 2
> Wavelength: 365-405nm
> Density: 1.1-1.2g/cm3
> Viscosity: 180-200cP
> Hardness: 80-85D
> Tensile Strength: 85-45MPa
> Elongation at break: 30-40%
> Molding Shrinkage: 4.3-5.6%
> Flexural Strength: 40-50MPa
> Flexural Modulus: 1000-1200MPa
> Heat deflection temp: 60-65C
> Bottom exposure time: 20-40s
> Normal exposure time: 1.5-3s (8s color)
◾Resin parameters for Tough 2.0
> Wavelength: 365-405nm
> Density: 1.1-1.15g/cm3
> Viscosity: 150-250MPas
> Hardness: 76D
> Tensile Strength: 50-60MPa
> Elongation at break: 30-50%
> Tensile Modulus of Elasticity: 800-1200MPa
> Flexural Strength: 35-45MPa
> Flexural Modulus: 900-1200MPa
> IZOD Impact Strength: 50-60J/m
> Heat deflection temp: 60-65C
◾Resin parameters for Tough Ultra
> Wavelength: 365-405nm
> Density: 1.05-1.25g/cm3
> Viscosity: 500-900cP
> Hardness: 71-75D
> Tensile Strength: 20-28MPg
> Elongation at break: 70-80%
> Flexural Strength: 15-25MPa
> Flexural Modulus: 350-800MPa
> Heat deflection temp: 50-65C
> Shrinkage: 5.1-6.2%
◾Resin parameters for Rigid 100
> Wavelength: 365-405nm
> Density: 1.14g/cm3
> Viscosity: 950-1150mPas
> Hardness: 88-90D
> Tensile Strength: 80-85MPa
> Elongation at break: 5-7%
> Flexural Strength: 95-110MPa
> Flexural Modulus: 2800-3400MPa
> Heat deflection temp: 105C
✔️ Shake well before use
✔️Wear a gloves and mask for safety
✔️ Store at 15-35 ℃ in a cool, dry place. Keep away from direct sunlight to avoid unwanted curing
✔️ Seal well after use to avoid contamination
⚠️ Precautions:
This product should not be ingested. Keep away from children. Do not put in your eyes. In case of accidental contact, flush with running water as soon as possible for at least 15 minutes. If skin is irritated, consult a doctor immediately. Always use gloves when handling uncured resin
#3DPrinting #3DPrint #3DPrinter #Resin #Anycubic #PhotosensitiveResin #Photon #SLA #DLP #3dresin #elegoo #mars #creality #photopolymer
