EPAX 1kg Porcelain-like Resin for 3D printer Specialty resin

EPAX Porcelain-like Resin
> Porcelain-like shining surface with high precision
> Porcelain White color
> Hard and Very Low Shrinkage
> Low odor
> Easy to print
> Very good surface scratch resistance
> Great for printing art work like sculpture

Technical Specifications:
Viscosity: 90-200MPas
Liquid Density: 1.05-1.13g/cm3
Flexural Stregnth: 40-50MPa
Heat deflection temperature: 85C
Shrinkage: 3.56-3.95%
Tensile strength: 36-48MPa
Elongation at break: 7-12%
Shore hardness: 78-84D
Glass transition temperature: 90C
Curing wavelength: 385, 395, 405nm

✔️ Shake well before use
✔️Wear a gloves and mask for safety
✔️ Store at 15-35 ℃ in a cool, dry place. Keep away from direct sunlight to avoid unwanted curing
✔️ Seal well after use to avoid contamination

👍 Compatible with Anycubic, Creality, Elegoo, Phrozen, Peopoly and other resin printer brands that use 405nm wavelength

⚠️ Precautions:
This product should not be ingested. Keep away from children. Do not put in your eyes. In case of accidental contact, flush with running water as soon as possible for at least 15 minutes. If skin is irritated, consult a doctor immediately. Always use gloves when handling uncured resin

#3DPrinting #3DPrint #3DPrinter #Resin #EPAX #Anycubic #PhotosensitiveResin #Photon #SLA #DLP #3dresin #elegoo #mars #creality #photopolymer