ANYCUBIC Resin 1kg 3D Printing Resin Standard / Craftsman DLP Resin for SLA/DLP 405nm

ANYCUBIC 405nm Resin for Photon 3D Printer LCD UV Sensitive Resin 1kg Liquid Printing Material

👍 Compatible with Anycubic, Creality, Elegoo, Phrozen, Peopoly and other resin printer brands

◾Resin parameters for Basic resin
> Hardness: 79 D
> Viscosity(25℃): 552 mpa.s
> Curing wavelength: 405 nm
> Liquid density: 1.1
> Solid density: 1.184 g/cm3;
> Shrinkage: 7.1%
> Tensile strength: 23.4 Mpa
> Curing time: 6-10 s
*These values are highly dependent on your machine you can message us directly if you need some exposure settings we're here to help
> Elongation at break: 14.2%
> Shelf life: 1 year (expiry date indicated on bottle)

◾Resin parameters for Anycubic Eco Resin
> Hardness: 84 D
> Viscosity(25℃): 150-300 Mpa.s
> Curing wavelength: 355-410 nm
> Solid density: 1.05 - 1.25 g/cm3;
> Curing time: 6-10 s
*These values are highly dependent on your machine you can message us directly if you need some exposure settings we're here to help
> Elongation at break: 11-20%
> Thermal deformation 80℃
> Shelf life: 1 year (expiry date indicated on bottle)

◾Resin parameters for Anycubic Craftsman Resin
> Viscosity(25℃): 150-250 Mpa.s
> Absorption wavelength: 355-410nm
> Density: 1.05-1.25g/cm3
> Flexural modulus: 1.882-2.385Gpa
> Flexural strength: 59-70MPa
> Heat distortion temperature: 60℃
> Coefficient of thermal expansion: 95E-6
> Volumetric shrinkage: 3.72-4.24%
> Linear shrinkage: 1.05-1.35%
> Tensile strength: 36-52MPa
> Tensile modulus: 1.779-2.385GPa
> Ultimate tensile strength: 11-20%
> Shore hardness: 80D
> Notched impact strength: 44-49j/m

✔️ Shake well before use
✔️Wear a gloves and mask for safety
✔️ Store at 15-35 ℃ in a cool, dry place. Keep away from direct sunlight to avoid unwanted curing
✔️ Seal well after use to avoid contamination

⚠️ Precautions:
This product should not be ingested. Keep away from children. Do not put in your eyes. In case of accidental contact, flush with running water as soon as possible for at least 15 minutes. If skin is irritated, consult a doctor immediately. Always use gloves when handling uncured resin

#3DPrinting #3DPrint #3DPrinter #Resin #Anycubic #PhotosensitiveResin #Photon #SLA #DLP #3dresin #elegoo #mars #creality #photopolymer